ACS 1113 Appliance Password and IP Change Process:

1.  Insert ACS Recover CD into DVD-Drive
2.  Connect Console Cable (DB9 to DB9) to Laptop and Appliance
3.  Start Terminal Session with Following  (115200, 8, None, 1, NONE)
4.  Connect Monitor and Keyboard to ACS Appliance
5.  Power Cycle ACS Appliance
6.  Use Keyboard and mouse to Select Option 1 for Administrator Password Reset
7.  Remove Recovery CD from Appliance
8.  Press Enter on Keyboard to reboot appliance
9.  Disconnect Keyboard and mouse from Appliance
10. Wait approx 5 minutes for Console session to return.  (Don’t rush it, get a coffee or a snake then come back)
11. At login prompt user the Default = Administrator with no password.
12. You will be prompted to enter a new username.
13. You will be prompted to enter a new password, you will be prompted to enter this twice
14. Login with new Username and Password
15. Connect Ethernet Port 1 (Top Port) on Appliance to laptops ethernet port wait for green link light  (Without this step the appliance will not accept interface changes.)
16. Type “Set IP”  Follow the prompts to enter new IP information and select YES at the end
17. Type “Set domain” Follow the prompts to enter the new DNS prefix select YES at the end
18. Type reboot
19. Wait approx 5 minutes for Console session to return.  (Don’t rush it, get a coffee or a snake then come back)
20. Login with new Username and Password
21. Type Show to validate your config changes
22. Disconnect from laptop
23. Connect to production network
24. Done