In this session of A Few Easy Steps, we will be setting up an Access Port on a Cisco Switch. In General this will work on any Cisco Switch.

Session Prerequisites:

• You have terminal or console access to your Cisco device.

Session Assumptions:

• VLAN 291 is our target VLAN
• Interface FastEthernet 0/4 is our target port (This should be adjusted for your situation)

Our goals of this session are:

• Setup VLAN 291
• Setup Access Port

Setup VLAN 291

!
conf t
!
vlan 291
!
end
!

Setup Access Port

!
conf t
!
interface fastethernet 0/4
!
switchport mode access
!
switchport access vlan 291
!
end
!
copy running-config startup-config
!

Entire Session:

!
conf t
!
vlan 291
!
exit
!
interface fastethernet 0/4
!
switchport mode access
!
switchport access vlan 291
!
end
!
copy running-config startup-config
!