In this session of A Few Easy Steps, we will Setup SNMP on a Cisco Router.
In General this will work on any Cisco IOS Device.

Session Prerequisites:

• You have terminal or console access to your Cisco device.

Session Assumptions:

• Read/Write Community is private
• ReadOnly Community is public
• Location is Columbus, Ohio
• Contact is Josh OBrien
• chassis-id is TestRouter

Our goals of this session are:

• Setup Read/Write Community
• Setup ReadOnly Community
• Setup SNMP Location
• Setup SNMP Contact
• Setup SNMP Chassis ID

Setup Read/Write Community

!
conf t
!
snmp-server community private RW
!
end
!
copy running-config startup-config

Setup ReadOnly Community

!
conf t
!
snmp-server community public RO
!
end
!
copy running-config startup-config

Setup SNMP Location

!
conf t
!
snmp-server location Columbus, Ohio
!
end
!
copy running-config startup-config

Setup SNMP Contact

!
conf t
!
snmp-server contact Josh OBrien
!
end
!
copy running-config startup-config

Setup Chassis ID

!
conf t
!
snmp-server chassis-id TestRouter
!
end
!
copy running-config startup-config

Entire Session:

!
conf t
!
snmp-server community public RO
!
snmp-server community private RW
!
snmp-server location Columbus, Ohio
!
snmp-server contact Josh OBrien
!
snmp-server chassis-id TestRouter
!
end
!
copy running-config startup-config

Find out more about SNMP on IOS here.

or

Check out this Search at NetworkSuperSearch.com.